Máy hàn cáp quang Inno View 7

• • SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)

• • Fiber count: Single
• • Applicable fber cables: 0.25mm- 3.0mm/ Indoor Cable (with VFH-40)
• • Applicable fber diameter: Cladding diameter: 80-150μm, Coating diameter: 125-1000μm

Splice loss

• Measured by cut-back method relevant to ITU-T standard:
• • SM : 0.02dB
• • MM : 0.01dB
• • DS : 0.04dB
• • NZDS : 0.04dB
• • G.657 : 0.02dB Splice mode

splice modes

• • Maximum 128 Splice mode
• • Internal splice data storage: 10,000
• • Splicing time: SM Quick mode: 7s

Heat oven

• • 5 applicable protection sleeve: 20mm, 30mm, 40mm, 50mm, 60mm
• • Heating time: 8- 900s
• • Typical heating time: 13s
• • Heat mode: Various heat modes available
• • Heat oven: VIEW 7 special heat oven

Power supply

• • Size: Height x Width X Depth = 167mm x 143mm x 163mm
• • Weight: 2.80kg (battery included)

• • Operating condition: 0~5000m above sea level, 0~95% relative humidity, -10~50℃, 15m/s max wind speed
• • Storage condition: 0~95% relative humidity, -40~80℃
• • Battery: -20~30℃ for long time storage

• • Viewing and displaying method: two cameras and 5.0 inch color LCD monitor
• • 520x magnifcation for single X or Y view, or 520x magnifcation for both X and Y view.
• • Tensile test: 1.96-2.25N
• • Terminals: USB2.0 / MINI USB

• • DO NOT collide the battery with sharp or hard objects.
• • DO NOT transport or store the battery with metals simultaneously.
• • DO NOT throw, drop, impact or bend the battery.
• • DO NOT strike the battery with hammers or tread on it.
• • DO NOT connect the anode and cathode of the battery to metals such as electrical short circuit.
• • DO NOT let the anode and cathode contact with the external aluminum coating of the battery so as to avoid short circuit.
• • DO NOT disassemble the battery under any circumstances.
• • DO NOT immerse the battery in fresh water or sea water, and avoid moisture.
• • DO NOT use or place the battery near heat source. (e.g. fre, heat oven)
• • DO NOT heat the battery or throw it into water.
• • DO NOT weld the battery directly.
• • DO NOT charge the battery near fre or in high temperature.
• • DO NOT put the battery into the microwave oven or high pressure container.
• • DO NOT use or place the battery in extremely high temperature